|
|
1. Measurment Shoulder
Put on a overcoat that is a comfortable fit.
Take your shoulder measurement from where the seam on the sleeve joins
the back left side to where the seam on the sleeve joins the back
right side. |
|
2. Measurment Sleeve
With your arm remaining straight at your
side, and your hand slightly curled, measure the area from the outer
edge of your shoulder seam to the first knuckle of your thumb and
subtract 1 to 1 1/2" depending on how long you like your Sleeves. Record
to the nearest half inch. |
|
3. Measurment Chest
Stand relaxed with your hands down by your
side. The measuring tape should be placed around your body over your
overcoat, close up under your arms and across your shoulder blades.
Tape should be held firm against the body but not too tight. |
|
4. Measurment Waist
The measuring tape should be placed around the
waist over the vest holding the tape firm against body, but not too
tight. |
|
5. Measurment Hip
The measuring the tape measure around your hips
at the part where your hips extend the farthest. Add 2 inches to
the measurement. Round up your measurement to the nearest full inch. |
|
6. Measurment width Front
The measuring the tape measure across chest from joining of one arm to joining of th other. |
|
7. Measurment width Back
The measuring the tape measure across back from joining of one are to joining of the other. |
|
8. Measurment Length
The measuring the tape should be held at the front of
the body, with the top of the tape placed on the shoulder seam and
measure down to the actual length wanted. |
No comments:
Post a Comment